How Do You Fix a Bubble in a Foam Surfboard?
How Do You Fix a Bubble in a Foam Surfboard

That terrible sense in your stomach when you damage your new surfboard. Everyone knows that it sucks! This surfboard restoration manual is here to help you.

Sadly, the reality is you’ll end up harming all your surfboards more than you like – fin stakes, smashing rocks, slipping in the car park (or perhaps in your garage) – they’re all risks of the sport. As such, gaining the skills necessary to complete your soft top repair is an important part of the learning adventure.

You need to consider a few things in order to fix a bubble in a foam surfboard. It is advisable cutting the deck just sufficiently so you can pack glue in there. Inspect the packaging and ask the hardware shop to guarantee it is EPS safe. 

What Are Foam Surfboards?

Foam Surfboards consist of high-density foam with a smooth plastic base. They are also long-lasting, gracious to surf, and ideal for novice surfers or those looking for a cheaper board for a bit of pleasure. Foam surfboards are also comprehended as foamies or soft boards.

Yet, don’t mix them with soft top surfboards. Why? Well, they are hard boards with a light coating of foam on the deck. Foamies arrive in many assorted sizes and types as well as colors and compositions.

Foamies began as plain shapes purely strived at amateur surfers. Yet, in recent years there has been an outbreak in popularity of these boards amongst more professional surfers too.

The emergence of better-shaped boards and more elevated grade fabrics has indicated that the possible execution in these boards has risen hugely. This is why they have evolved to be more appealing to sounder surfers.

Tip: You should know how to properly remove water from an epoxy surfboard. This is important to know.

There Is More to This

Trademarks like Catch Surf and Softech have guided the control in this area with high-performance forms and partnerships with conventional surfboard factories like Lost and Channel Islands.

Yet, the majority of smooth surfboards are still sold to the novice and improver market. The dimensions range runs from 5ft 8 foamies with all sizes obtainable up to 9ft foam longboards.

The most prevalent sizes are the 7ft and 8ft foam surfboards. These suit nearly everyone from bigger kids to grown-ups up to 90kgs. The latest Hybrid foamie surfboards are a clever complement to the founded shapes, they deliver more interpretation and quicker advancement while still paddling well.

How Do You Fix a Bubble in a Foam Surfboard?

That terrible sense in your stomach when you damage your new surfboard. Everyone knows that it sucks! This surfboard restoration manual is here to help you.

Sadly, the reality is you’ll end up harming all your surfboards more than you like – fin stakes, smashing rocks, slipping in the car park (or perhaps in your garage) – they’re all risks of the sport. As such, gaining the skills necessary to complete your soft top repair is an important part of the learning adventure.

As for a piece of straightforward advice – be sure you properly keep your board away when not utilizing it. Usually, people sabotage their boards in the security of their own homes just because they have them leaning loosely against the wall. Why not make your DIY Surfboard Rack.

As the fabrics that make soft boards differ from hard boards, the processes and mainly the outcomes used to repair them differ. For main restorations, it goes without saying if you don’t understand what you’re doing it’s most suitable to get a professional to fix it. 

  • But if it’s a specific hole, fin scratch, or little damage then you should comprehend how to have a go at it. There’s something quite enjoyable about fixing a surfboard, even if it doesn’t look flawless.

Bodyboard Repair Kits?

Let’s start by saying what most soft top manufacturers always say. Never utilize bodyboard repair kits to complete your soft top repair such as “The Blob” or “Sponge Rez” as they will eat away and damage the internal EPS foam core. This truly goes without saying!

As a matter of fact, bodyboards look very similar to soft boards with their slick bottom and foam decks but bodyboards are generally made of PP (Polypropylene) or PE (Polyethylene), while the soft boards are made from EPS (Extruded Polystyrene).

Tip: Be mindful that surfing in a thunderstorm is not safe at all. Make sure to always remember this and keep yourself safe at all times!

The Type of Damage

The rigor of the harm and the clear area on the board will need different methods. Because of that, we will break it down by each element:

Fin Holes

For holes, scrapes, blemishes, pealed seams, skin rips, and/or de-lams use Sikaflex 291, Gorilla Glue, and/or hot-melt glue from a glue gun. 

Epoxy Resin can be employed but only in places where you won’t put your hands or feet as it heals hard. The previously cited outcomes dry to be a little more soft and malleable without any sharp edges. 

Another option is SolarRez UV Cured Wetsuit repair. These parches are transparent and “flexible” so there will be no harsh edges. As it’s Solar Cured, it might require a few layers to guarantee the blend can be set.

Follow the manufacturer’s instructions for the correct and safe use of these repair compounds. Make sure the place in question is pure and dry before risking soft top repairs. Please let 24 hours pass for repairs to cure and dry before you decide to use it.

Tip: For your safety, it is advisable to know what wind is the best for surfing and why. Make sure you are aware of this.

How Do You Get Water Out of Epoxy Surfboard

Damage to Slick Bottom

As a matter of fact, most damage caused to the slick can be repaired similarly to dings on a typical hard surfboard. Gorilla 2 Part Epoxy is the right outcome that is ideal for the smooth side of a soft-top surfboard. 

If the exterior of the harmed area is rugged give it a light sand with a fairly fine-grit sandpaper. When it becomes soft, confirm it is clean and dry before using any epoxy resin.

Use the epoxy resin to seal any gaps or areas and rub it over utilizing a bit of plastic so it dries smoothly. Try to extract as much of the leftover resin near the area in question. Do that to detour having to get rid of it after it has been set. 

Ideally, you want to restrict the quantity of sanding needed after fixing. Be mindful that this element responds rather fast, so there is not a lot of time to waste.

Bubbled Deck

Shrinkage or bubbles on the deck of soft-top surfboards is a typical problem that can arise from overexposure to heat. Maybe even just from all those years or long usage. 

This harm is typically extremely “decorative” and really shouldn’t affect board undertaking. If it’s a bubbled deck, it is advisable to slice the deck just sufficiently so you can pack some glue in there.

Gorilla 2 Part Epoxy or an equivalent outcome will work well for this. Always inspect the packaging or ask at your hardware shop to ensure it is an EPS-safe one, and if you hold any doubts, try it on a small sampling area first.

Tip: There is a popular query in regards to surfers not losing their boards. Some boards have a leash that can make this happen.

Short-Term Minor Repairs

What if you are on a surf expedition or away from any restoration tools and you get a small hole in your smooth board but want to keep surfing it? A simple “quick” soft-top surfboard restoration maneuver you can exploit affects things you are likely to have on hand:

  • Surfing wax (any type)
  • A lighter 
  • A scoop or metal cup

Put a little piece of wax in the scoop and heat with a lighter flame until it begins to soften. Carefully flow the runny wax into the gap/fix you are supplying. Allow some time to chill and solidify and utilize the bottom edge of the scoop to press it firmly into position. 

This is just good as a quick fix to restrict the quantity of water that will get into the void. It is not an excellent fix and should be properly restored as soon as feasible.

Tip: Did you know that many snowboarders wave their arms while enjoying this beautiful venture?

How to Put a Leash on a Foam Surfboard?

  • Bring the rope at the end of the leg rope and put it through the leash plug.
  • Feed the leg saver via the two circles of the rope
  • Position the leg rope strap close around the ankle 

How to Wax a Foam Surfboard?

Waxing a surfboard is essential. Let’s see how to wax a foam surfboard below:

  • Be sure you’ve cleared messy, sandy wax through the help of natural sunlight, a wax mix, a non-toxic surfboard cleanser, as well as coconut oil.
  • Use a bottom coat of wax to deliver a basis for absorbing the deck.
  • Incorporate the leading coat of surf wax.
  • Clean and re-wax your surfboard regularly to expand its life.

You might also like…

What Side of the Paddle Do You Use to Paddle Backwards?

What Side of the Paddle Do You Use to Paddle Backwards?

You may have noticed that some people would hold their paddles backward. Then again, you may have found yourself repeating the same mistake when you first started because you simply didn’t know. Yet, after some brief research and watching other newbies, you would see...

Can You Wakesurf With a Wakeskate?

Can You Wakesurf With a Wakeskate?

Wakesurfing? It's without a single doubt an incredible venture! It is a mix between surfing and wakeboarding. Speaking of wake surfing, the type of boat you swing behind is crucial. It's that crucial to be thin ice between life and death! Can you wakesurf with a...

Can You Surf With a Wakeskate (Here’s How)

Can You Surf With a Wakeskate (Here’s How)

Wakesurfing is absolutely amazing. It is a mixture between surfing and wakeboarding. In wake surfing, yet, the sort of boat you swing behind is critical – it can even be a life and death situation! Can you surf with a wakeskate? Let's hop into more details down below!...

Can You Wakeboard Without a Spotter?

Can You Wakeboard Without a Spotter?

If you're a beginner wakeboarder looking for some beginner-friendly info, this one's for you. Today, we'll consider the issue of wakeboarding without a spotter. In other words, we'll try to answer the question proposed by this article's title: can you wakeboard...

Can You Use an Inflatable Paddleboard in Winter?

Can You Use an Inflatable Paddleboard in Winter?

There's a good chance that most of our readers associate the phenomenal activity known as paddleboarding with the summer. However, there are probably some of you that wonder: are you able to paddle board during the coldest season of the year? In other words: can a...

When Should I Start Paddle Surfing?

When Should I Start Paddle Surfing?

So, we heard you're planning to jump straight into your first paddle surfing adventure? Also, aren't you a bit old to wonder if you're old enough to start paddle surfing? It seems we're getting a bit ahead of ourselves here. Anyway, sorry for the lame intro, here's...